News
-
2024-07-12How to Distinguish the performance of Dry Mortar Equipment？
1. Raw material measurement accuracy: dry mortar, including thermal insulation mortar, bonding mortar, etc., the formula of each mortar is not the same, but there are a variety of raw materials gathered together after mixing. 2. Mixing average: the main machine of the dry mortar equipment is a dual-axis blade non-gravity mixer, which makes the material project in the three-dimensional direction and converge with each other. The high-speed flying knife will break up the clumping material, and the materials of different particle size and density will be mixed and average in a very short time, and the mixer will not produce segregation. 3. The effect of dust removal: the powder particles after the dust removal of the blender can complete zero emission and recycling applications, and the emission requirements of the dust regulations reach or are higher than the excessive environmental protection grade regulations. 4. Reasonable structure: dry mortar equipment in the raw material tank, weighing system, reporting equipment, mixing host, packaging equipment, dust removal equipment, etc., due to the large number of equipment varieties, should be in the limited occupation area and space to stop reasonable arrangement, save equipment resources and site resources. 5. Continuous work and no fault:...
-
2024-07-11How to choose Sand Dryer Equipment?
Sand is a common granular material, which is used in construction, road construction, filtration, culture and beautification, and when smelting fast solvents exist in many aspects of social life. We can see the figure of sand everywhere in our daily life, it has become an indispensable part of our daily life, sand in the application process many times need to be processed to be used, sand dryer in this link plays an important role, the current market production of dryer manufacturers more, For those who do not buy experience, they do not know how to buy the right sand dryer for them. Today, we will explain how to buy sand dryer equipment for you. 1. Choose the right type of sand dryer： At present, there are many manufacturers producing dryers on the market, and there are more types of dryers. Common types of dryers include tumble dryers, long drum sand dryers, tower dryers, three-return sand and other drying equipment. Due to the relatively stable chemical nature of sand, water often only exists on the surface of the material, and the water content is not large. All the general choice of tumble dryer to dry, the sand in the lifting plate...
-
2024-07-10What are the Safety Operating procedures of the Double-shaft Mixer?
Double-shaft mixer is a stirring shaft with two large stiffness, a certain spiral Angle and pitch above the shaft distribution of a number of fan stirring blades, two blade shafts in the tank box reverse rotation (and at the same time adding liquid), so that the powder material in the tank is evenly stirred (humidification), the blade is made of wear-resistant cast iron. Safe operation and maintenance procedures: 1. Operators must wear protective supplies before they can operate on duty. 2. Before starting, it is necessary to check whether the fixed parts are firm, whether there is oil in the lubrication point, clean up and remove all debris that hinders the operation. 3. When starting, start the motor first, and then add the material to stir, need to stop, first stop the feeding, stop the motor after no material. 4. Whether the stirring blade is complete and whether it is loose; Whether the triangle belt is complete and the tension is consistent. 5. Fill each lubricating point with lubricating oil, stir tank safety protection net, triangle belt, coupling safety cover is complete and firm; After confirming that there is no power-on fault, send a power-on signal and prepare to power...
-
2024-07-10How to Increase the Output of Dry Mortar Production Line?
As we all know, the output of dry mortar production line is mainly determined by the configuration of equipment, but the facts are different. General small dry mortar production line, did not achieve automated production, the use of manual feeding, etc., production capacity generally has no room to increase. Therefore, the increased capacity of dry mortar production line here is mainly for tower complete sets of equipment and automatic production lines. Generally, in the dry mortar production line, the entire production process is controlled by an automated control system, so to further increase production capacity can be started from several aspects: 1. Strictly control the working time of workers, mainly for the workers operating the dry mortar production line. Make good use of every minute to ensure production efficiency. There is a common problem in the dry mortar industry, that is, the dry mortar production line is still running, and there are many operators. This will make the overall production efficiency is reduced. 2. Increase the control of all links, such as raw material reserve, feeding, and packaging of finished products, strictly control all links, so as not to miss anything. 3. Replace the old dry mortar production line, with...
-
2024-07-05Which is more Advanced, Three Drum Dryer or Triple Cylinder Drying Machine?
The two have similarities: 1. All industrial dryers are used to dry sand and other materials with good fluidity. 2. All are composed of three cylinders, and the material goes back and forth in the dryer three times to achieve full drying of the material. 3. Small floor area, high heat utilization rate, energy saving and environmental protection, dry thoroughly. The difference between the two: 1. Generally speaking, the three-return dryer is short in length and large in diameter, while the three-cylinder dryer is slightly longer in length and relatively small in diameter. 2. The three-cylinder dryer has no taper from the appearance, and is slightly longer, while the three-return dryer has a slight taper from the outside, and is thicker and shorter. 3. The three cylinders inside the three-return dryer have a certain taper, and the three cylinders inside the three-cylinder dryer have no taper. 4. Generally speaking, the length of the three-cylinder dryer can be designed to be longer, and the three-return dryer is designed to be shorter. Which of the two dries better? We suggest that it is better to use a three-cylinder dryer or multiple three-return dryers for drying materials above 50 tons per hour; The...
-
2024-07-05What factors should be considered when using Sand Dryer?
1. Drying temperature: According to different materials, in the case of drying quality, try to choose a higher drying temperature to speed up the drying speed. 2. Humidity: Materials have different humidity. 3. Wind speed of hot air medium: The speed of hot air medium in the drying room is related to the drying speed, material shape and material characteristics. 4. Drying speed and drying method selection: drying should be controlled under technical parameters, such as temperature, humidity and wind speed, in order to achieve the retention of raw materials during the drying process. 5. Material placement: Stack thickness and placement method affect the drying speed. Reasonable control of pile thickness, increase heat exchange area and ventilation, speed up the drying speed. 6. Mixing and drying of different varieties: in principle, when raw materials are dried, a single variety is needed, and it is impossible to mix and dry together.
