• 
  2026-11-09

  500kg – 2000kg Ton Bag Packing Machine | Ton Bag Filling Machine from Tongding Machinery

  If you are searching for a stable 500kg ton bag packing machine, 1000kg jumbo bulk bag packing machine or 2000kg big bag packer for your production line, Tongding Machinery’s bulk bag filling machine is a practical choice for bulk powder and granule packaging. Our ton bag filling station covers the full range from 500kg to 2 ton, matching most common FIBC jumbo bag sizes used in dry mortar, mining, chemical and construction industries. 一.Key Specs of 500–2000kg Ton Bag Packing Machine This jumbo bag filling machine supports gross weight hanging weighing design, which is the popular structure many clients look for. It can handle 500kg, 1000kg and 2000kg FIBC bags flexibly. The weighing error is controlled within ±0.2%, and the filling speed reaches 6–12 bags per hour, depending on material flow property. The machine is semi-automatic, with pneumatic bag clamping and dust collection port to reduce powder leakage. Clients can buy the standalone ton bag packing machine separately or match it with our mixer, silo and conveyor for a complete dry mortar production line. 二.Main Advantages of Tongding Jumbo Bag Filling Machine This 500kg-2000kg gross weighted hanging bulk bag packing machine is designed and manufactured by Tongding Machinery. It adopts...

• 
  2026-11-06

  Turnkey mixing units for producing dry mortar, plaster, screed and diy store products

  The Tongding “turnkey” mixing plant is a fully equipped, ready-to-operate production system designed specifically for manufacturing dry-mix mortars, plasters, floor leveling compounds, and packaged products for the DIY retail construction market. It represents an ideal investment for entrepreneurs, distributors, and manufacturers looking to supply pre-mixed construction materials to the local retail market. 一.What Products Can This Turnkey Mixing Line Manufacture? This dry-mix mortar mixing system supports flexible recipe adjustments—a key advantage for the DIY retail sector. It is capable of producing a wide range of finished products, including standard dry-mix mortar, wall plaster, cement-based leveling compounds, tile adhesives, grouts, and various other construction materials in small-format packaging. In the DIY retail market, customers often require a diverse product assortment in smaller package sizes. This equipment allows for rapid recipe switching without the need for complex modifications, enabling you to offer a rich variety of products to hardware and building supply stores. 二.Core Components of the Turnkey Dry Mortar Mixing System This standard turnkey mixing plant consists of storage silos, an automatic weighing and proportioning system, a twin-shaft mixer, screw conveyors, a packaging machine, and a PLC control cabinet. Operators can select the required recipe with the press of a single...

• 
  2026-11-03

  Sand Dryer Machine for Dry Mortar Mixing Plant

  A reliable sand dryer machine is essential supporting equipment for dry mortar mixing plant. Dried sand quality directly determines finished mortar stability, strength and storage performance. Tongding Machinery triple-pass rotary sand dryer is built to pair with dry mortar lines, delivering consistent low-moisture sand for tile adhesive, plaster and masonry mortar. We supply standalone dryers and integrated drying systems with flexible, custom layouts for global manufacturers. 一. Why Sand Dryer Machine Is Essential for Dry Mortar Mixing Plant  1.Required Sand Moisture Standard in Dry Mortar Production Dry mortar requires sand moisture below 0.5%. Excess moisture triggers early reaction of cement additives, causing caking, unstable mixing ratios and defective finished goods. Our sand dryer machine maintains this strict moisture target for steady continuous production. 2.Problems Caused by Wet Sand in Dry Mortar Mixing Line Wet sand clogs conveyors and silos, leads to inconsistent mortar strength and inaccurate automatic batching. Our dryer removes these risks and keeps your dry mortar plant running reliably. 二.Working Principle of Rotary Sand Dryer Machine for Dry Mortar 1. Heat Exchange Process Inside Triple Cylinder Dryer Wet sand travels through three nested cylinders with counter-flow hot air. Gradual heat exchange extends retention time, boosts thermal efficiency and...

• 
  2026-10-28

  What are the Safety Operating procedures of the Double-shaft Mixer?

  Following standardized safety operating procedures for the twin-shaft zero-gravity mixer is essential to prevent mechanical injury, dust hazards and equipment breakdown during dry mortar and powder mixing production. This guideline covers the full workflow from pre-start inspection to emergency response for operators. Pre-operation Safety Inspection of Twin-shaft Zero Gravity Mixer Before starting the twin-shaft zero gravity mixer, operators must complete a full visual and functional inspection. Check whether the mixing chamber has residual materials or foreign hard objects that may damage the blades. Verify all safety guards and protective covers are firmly installed and undamaged. Test the emergency stop button to confirm quick response, and inspect cables, motors and electrical cabinets for loose wiring or water leakage. Do not boot the mixer if any safety component fails. Required Personal Protective Equipment (PPE) for Operators Qualified PPE must be worn before operating the powder mixing machine. Dust respirators are mandatory to avoid inhalation of fine powder. Anti-slip safety shoes and impact-resistant goggles are also required. Loose clothing, necklaces and long hanging hair should be restrained, as they may be caught by rotating shafts and mixing paddles. Safe Operation Steps During Mixer Running Start the machine with no load first and wait...

• 
  2026-10-26

  Dry mortar production line Successfully installed In Indonesia By Tongding Machinery

  一.Project Overview of Dry Mix Plant in Indonesia Yesterday, a dry-mix mortar production line project by Tongding Machinery in Indonesia successfully completed on-site installation, commissioning, and trial runs. The facility is designed for the production of tile adhesive with a capacity of 20 tons per hour. This dry-mix line is specifically tailored to Indonesia’s tropical operating conditions, local power supply, and the client’s specific factory infrastructure. We provide comprehensive on-site installation and training services abroad. 二.Dry Mortar Plant Installation and Commissioning Process 1.Project Definition Phase: Review of technical drawings, verification of facility foundations, and inventory check upon arrival of containers. 2.Installation Phase: Erection of steel silos, piping and electrical wiring, commissioning of individual units, and integrated system testing—with considerations for Indonesia’s rainy season, coordination with local labor, voltage compatibility, and dust-control measures. 4.Acceptance Phase: Successful completion of both no-load and full-load (material-fed) testing, followed by operational training for the client. 三.Suitable Dry Mortar Line for Indonesia Tropical Market 1. Adapted for the hot and humid tropical climate of Southeast Asia: features anti-caking and moisture-proof designs. 2. Capable of producing a wide range of products: tile adhesive, wall putty, plaster mortar, and grout. 3. Operational advantages: easy access to spare parts,...

• 
  2026-10-20

  1-10th/h simple tile adhesive production plant ——Tong ding Machinery Soure Manufacture

  一.Simple Tile Adhesive Production Plant Features and Advantages A simple tile adhesive production setup centers on a dual-shaft, zero-gravity mixer. After being dried and screened, sand is fed into a storage silo, while cement, adhesive powder, and other minor ingredients are added—either manually or via an automated metering system. The mixture is blended for 60–120 seconds before being discharged for packaging. This system requires a small footprint (a facility of approximately 100–200 m² is sufficient for production), entails low investment and minimal risk, offers a quick return on capital, and can be operated by just 1–2 people. 二.Components of a Simple Dry-Mix Production Line A simple dry-mix production line consists of 7 components. 1.Feeding Port：Feed raw materials and additives though the feeding port into the 1st screw convey. 2.1st Screw Conveyor：Conveying materials to the mixer.The spiral blade adopts wear-resistant steel; The patent sealing device to prevent the bearings into the dust. 3.Dry Powder Mixer：Completely mix the raw materials and additives into ideal mixing effect. A. The spiral belt wear resistant steel, has a long service life; B. It is backed by wheel drive settings, to prevent shaft breaking; C. The motor reducer adopts direct type, stable quality, energy saving and environmental...