HZS60 Concrete Mixing Plant
Theoretical production capacity: 60m³/h
Overall dimension: 36500x11300x20400mm
Mixer Model: JS1000
Batching machine model: PLD1600
Total power: 110Kw
Standard discharging height: 3.8m
Applicable materials: suitable for mixing plastic, dry hard, light aggregate concrete and all kinds of mortar and mortar.
Application: HZS60 concrete mixing plant is widely used in large and medium-sized prefabricated component factories, highways, bridges, water conservancy, wharves and other industrial and civil construction projects.
Product Introduction
1.Theoretical productivity of HZS60 concrete mixing plant is 60 cubic meters per hour, also called 60 commercial concrete mixing plant. It is equipped with JS1000 forced double horizontal shaft mixing machine with a nominal capacity of 1000L, batching machine with a batching capacity of 1600L, and screw conveyor with a maximum production rate of 80t/h.
2.It mainly consists of cement silo|cement tank, screw conveyor, PLD batching machine, double horizontal shaft mixing machine, computerized control and metering system and other components.
3.The whole machine adopts double computer control system, which can automatically guarantee the system to continue production control without any influence when the double machines are switched. Dynamic panel display can clearly understand the operation of each part. Intuitive monitoring interface, can clearly and accurately observe the workflow.
4.It has the advantages of high productivity, reliable performance, low investment, strong mobility and small floor space.
5.Widely used in large and medium-sized building construction, road and bridge projects and precast plants producing concrete products, it is the ideal equipment for large and medium-sized building projects, road and bridge projects and commercial concrete production units.
Working Principle
1）Aggregate from the batching station aggregate silo unloading door unloaded into the aggregate metering hopper for measurement, measurement after unloading to the far turn of the flat belt, flat belt to the inclined belt conveyor, the inclined belt conveyor to the mixer on the top of the hopper waiting for instructions.
2）At the same time, cement, as well as fly ash and so on, such as by the spiral conveyor conveyed to their respective metering hopper for measurement, water, as well as admixture by the pump and additives were pumped to their respective metering hopper for measurement.
3）Measurement.
4）After the measurement of all kinds of materials, the control system sends out the instruction to start feeding into the mixer for mixing.
5）After mixing is completed, open the discharge door of the mixer, and unload the concrete into the mixing transportation through the discharge hopper, and then enter the next working cycle.
Parameter
| HZS60 Concrete Mixing Plant | ||
|
Capacity（m³/h） |
60 |
|
|
Mixer |
Model |
JS1000 |
|
Aggregate particle size (mm) |
≤80 |
|
|
Host power (kW) |
2*18.5 |
|
|
Capacity (m³/h) |
50-60 |
|
|
Batching hopper |
Model |
PLD1600 |
|
Power(kw) |
30 |
|
|
Weighing range and precision |
Aggregate(kg) |
±2% |
|
Cement(kg) |
±1% |
|
|
Fly ash(kg) |
±1% |
|
|
Water(kg) |
±1% |
|
|
Additives(kg) |
±1% |
|
|
Total power(kw) |
130 |
|
|
Discharge height (m) |
4.1 |
|
Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.